The Deep Throats are double pole Electrodes that features corona 'cockhead' stimulation combined with adjustable urethral stimulation. Consisting of two parts, the Main Body of the Deep Throats encircle the 'cockhead' with a built-in expansion joint allowing for individualized fit with removable urethral Electrodes that we call the 'Slim Jim' and 'Big Jim'.

The Deep Throats are double pole Electrodes and as such can be used alone. But they can also be used as single pole Electrodes by only using one of their Low Profile Connections and a second Electrode to complete the circuit. It can also be combined with various Electrodes in order to intensify their effects.

Some of the Electrodes you might try the Deep Throat with 'Slim Jim' with are:

  • Tubular Mid-Ring (Item #PES145)
  • Prostate Stimulator (Item #PES127)
  • Testicle Tubular (Item #PES128)


Some of the Electrodes you might try the Deep Throat with 'Big Jim' with are:

  • Tubular Base Ring (Item #PES143)
  • double pole Electro-Flex™ Anal Plug (Item #PES131 or PES133)
  • single pole 5/8" width Electro-Flex™ Penile Ring (Item #PES101, PES105, or PES111)

The 'Slim Jim' is molded with 3 segments:

  • The total diameter of the 'Slim Jim' is 1/8" with a total length of 6-5/8".
  • Electrode A is 5/8" of Electro-Flex™.
  • Electrode B is 1-1/2" of Electro-Flex™.
  • These two Electrodes are separated by 4-1/2" of non-conductive silicone.

The 'Big Jim' is molded with 3 segments:

  • The total diameter of the 'Big Jim' is 1/4" with a total length of 6-1/4".
  • Electrode A is 5/8" of Electro-Flex™.
  • Electrode B is 1-3/8" of Electro-Flex™.
  • These two Electrodes are separated by 4-1/4" of non-conductive silicone.

Instructions for Use:

  1. Decide which end of the 'Slim Jim' or 'Big Jim' you wish to insert.
  2. Insert the 'Slim Jim' or 'Big Jim' into the capture bead on the Main Body of the Deep Throat.
  3. Using plenty of lubricant, insert the 'Slim Jim' or 'Big Jim' into the urethra.
  4. Adjust the Neck of the Main Body so that the 'Slim Jim' or 'Big Jim' is comfortably seated when the Main Body is in place. You do not want the Neck to be pulling on the 'Slim Jim'or 'Big Jim'.
  5. Make sure the corona or cockhead is thoroughly lubricated for application of the Main Body.
  6. Apply the Main Body around the coronal ridge or cockhead.
  7. Tighten or loosen the Neck further if needed.
  8. Connect one side of the Low Profile Lead to the connection point on the Main Body and the other side directly to the exposed end of the “Slim Jim” or slide the Removable Low Profile Connection onto the 'Big Jim', connect the Low Profile Lead.
  9. Plug the lead into the Power Box.

'3-Point Contact' Configuration:

  1. Insert Electrode A first and slide the 'Slim Jim' or 'Big Jim' through the capture bead leaving only enough of Electrode B to connect the Low Profile Lead.
  2. Connect the other end of your Low Profile Lead to the Connection Point on the Main Body. (Note: This configuration is not recommended if there is any chance that a fully inserted 'Slim Jim' or 'Big Jim' will come into contact with the sphincter of the bladder. )

'Bounce Back Effect' Configuration:

  1. Insert Electrode B first and slide the 'Slim Jim' or 'Big Jim' through the capture bead to whatever depth you are comfortable with.
  2. Connect your Low Profile Lead to Electrode A.
  3. Connect your remaining Low Profile Connection to the Connection Point on the Main Body. (Note: You do not have to insert the 'Slim Jim' or 'Big Jim' all the way. This configuration allows for as deep or as shallow an insertion as you prefer.)

Important Safety Notes:

  • Due to their design, the Deep Throats should only be used with our Low Profile Lead technology. Use with other leads may cause damage to the Electrodes or they may not function properly.
  • As these are tubular Electrodes, the entire surface is conductive. It is recommended to wear latex gloves to help prevent accidental above-the-waist contact. This is only necessary when the power source is turned on.
  • DO NOT share Electrodes that are used for urethral penetration.
  • Take care not to remove the Deep Throats by pulling on the Adjustable Neck or Collapsible Insulator Sheath.
  • Please note that the Adjustable Neck must be able to move freely through the ring of the Main Body. For this to be possible, the joining of the ring and the neck of the Main Body must be thoroughly lubricated. Failure to do so may damage the Electrode.

Lubrication:

  • PES recommends the use of a lubricant with all PES Electrodes. Lubricant not only lubricates but also decreases the possibility of hot spots. We recommend PES ElectroLube (Item #PES75). You can also use Olive Oil. When using the 'Slim Jim' or 'Big Jim', it is recommended to use a sterile lubricant, such as Medi-Pak Perfomance Sterile Jelly. Make sure the lubricant you are using is a water-based lubricant with no silicone ingredients. Never use petroleum jelly or mineral oil as lubricant as these can damage the electrodes.
  • Caution: Do not use lubricants with silicone ingredients. Silicone is an insulator which greatly affects conductivity, and can chemically bond to the products made from Electro-Flex™ when applied over a long period of time. This will cause the apparatus to cease to function properly, and may void the warranty on the Electro-Flex™ line.

Cleaning:
These Electrodes can be washed with soap and water (a 10% bleach, 90% water solution with a mild liquid soap also works), but do not soak or scrub. Make sure to wash off all fluids and rinse the Electrode thoroughly. Allow it to dry completely. For disinfection; if you plan to use the electrode urethrally or for shared usage; we recommend the use of Swiss Navy Toy & Body Cleanser. Swiss Navy is safe for use on the skin as well as the electrode. It is anti-viral, anti-fungal, & anti-bacterial. Allow to dry completely before use.